INSTALLATION GUIDE:
HANGING
WIRE KIT
Kit Components
SCREWS
ALUMINUM CRIMPS
CEILING MOUNTS
CABLE WIRES
DRILL
PENCIL
PLIERS / SNIPS
STAGE 1
INSERT AND TRIM WIRES
1. THREAD TOP OF WIRE THROUGH THE CEILING MOUNTS.
IF THERE IS OVERHANG TRIM ABOVE THE CEILING MOUNT.
STAGE 2
MEASURE AND DRILL MOUNTS
2. MEASURE THE DISTANCE BETWEEN THE HOLES IN THE TOP OF THE SIGN AND USE THESE MEASUREMENTS TO SCREW THE CEILING MOUNTS TO THE CEILING USING DRILL AND SCREWS.
ADJUST HANGING WIRE LENGTH TO ENSURE SIGN SITS LEVEL. DEPENDING ON BACKBOARD SHAPE WIRE LENGTHS WILL VARY TO ACHIEVE LEVEL HANGING.
STAGE 3
INSERT CRIMP
3. THREAD CABLE WIRE THROUGH ONE OF THE ALUMINUM CRIMP HOLES. THEN THREAD WIRE THROUGH HOLES IN SIGN.
STAGE 4
CRIMP AND TRIM WIRES
4. THREAD WIRE BACK THROUGH THE OTHER HOLE OF ALUMINUM CRIMP. ENSURE 1CM OF WIRE REMAINS STICKING OUT.
CLAMP THE ALUMINUM CRIMP TIGHTLY WITH WIRES. ENSURE WIRE IS SECURED.
STAGE 5
ADMIRE SIGN
